November 16, 2026
← All advisories

OT Vendors Are Moving to the Cloud: Know What Your Plant Depends On

Red Tiger Security infographic titled OT Vendors Are Moving to the Cloud. Know What Your Plant Depends On. Eleven major OT vendors now sell a cloud-hosted or SaaS version of a product that used to run only on plant servers. Three stacked cards: Reasonable in the cloud, for historians, analytics and reports; Ask hard questions, for hosted SCADA, remote access and cloud licensing; Keep at the plant, for control, OPC connections, alarms and logins, which should work with no internet. Five vendor questions: what keeps running after a 72-hour outage; whether logins and licenses work offline; whether any control, safety, alarm or OPC write path goes through the vendor cloud; who shares the cloud tenant if it is breached; and whether a supported on-premises option will be kept. Footer: Ignition Cloud Edition has no device drivers, and site gateways keep the PLC connections. Check write paths and licenses. Sources: vendor pages, Ignition manual and Automation World, November 2026.

Microsoft's outage on 12 November 2026 is a good reason to ask what in your plant now depends on someone else's cloud.

David Utzke covered it in Automation World. His advice for industrial sites is to keep identity local, segment the control network from information technology (IT) and the cloud, keep real-time control and safety systems on site, and drill for a loss of cloud connectivity.

We reviewed 11 major operational technology (OT) vendors, counting AVEVA separately from parent Schneider Electric. This is our sample, not a market-wide statistic. All 11 now sell a cloud-hosted or software-as-a-service (SaaS) version of something that used to run only on plant servers. Most of it is historians, analytics and engineering tools, which is a reasonable use of the cloud. Some goes further.

Five of the 11 offerings put supervisory or control functions in the cloud:

Three others offer a cloud portal that configures or reaches into plant systems:

The remaining three are data, analytics, historian or manufacturing execution system (MES) services:

Two third-party figures help size the trend. The SANS 2024 ICS/OT survey found that 26% of respondents use the cloud in some part of industrial control system (ICS) and OT operations, and 45% avoid it. Cloud-based human-machine interfaces (HMIs) rose from 22% to 32%, and remote telemetry analysis rose from 40% to 56%. A 2024 Control Engineering / CFE Media survey commissioned by AVEVA found that 59% of HMI/SCADA decision-makers use or plan to use HMI/SCADA in the cloud within two to five years. That second figure is vendor-sponsored, so treat it with that label. Source: AVEVA's write-up of the survey.

Several manufacturing clients have asked us about Ignition and OPC servers. To be accurate, Inductive Automation's documentation says Ignition Cloud Edition has no device drivers and that connecting to a programmable logic controller (PLC) from the cloud is architecturally inadvisable. Their reference design keeps PLC connections on a gateway at each site. Two things are still worth checking. A cloud gateway can send writes down to plant tags through MQTT or OPC Unified Architecture (OPC UA) if someone enables it at both ends, and Ignition leased licenses revert to trial mode after 72 hours without internet access.

The cloud is fine for analytics and reporting. The risk starts when plant operations depend on a vendor's cloud for control, OPC communications, logins, licensing or remote access. Ask your vendor these five questions.

  1. If your cloud or our internet is down for 72 hours, what keeps running at the plant?
  2. Do operator logins and licenses keep working offline?
  3. Is any control, safety, alarm or OPC write path routed through your cloud?
  4. Who shares your cloud tenant, and what happens to our site if it is breached?
  5. Will you keep a supported on-premises option?

Our team does onsite facility assessments that map every cloud dependency from the field devices up through the DMZ, designs firewall segmentation that keeps control on site, and installs a firewall and sensor connected to the Red Tiger 24x7 Security Operations Center (SOC) for ongoing detection and response, with metrics and reports.

We are here to help, so check out our resources online at www.redtigersecurity.com and book a follow-up call with our team if you have any questions: https://calendly.com/jonathanpollet/30min

Sources: David Utzke, Automation World, 16 November 2026 https://www.automationworld.com/cybersecurity/article/55419146/outage-exposes-cloud-weakness ; SANS 2024 ICS/OT Survey https://www.sans.org/blog/cloudy-with-a-chance-of-industrial-cyber-threats-part-1 ; AVEVA / Control Engineering 2024 HMI/SCADA in the cloud survey https://www.aveva.com/en/perspectives/blog/hmi-scada-in-the-cloud/ ; Inductive Automation, Ignition Cloud Edition documentation https://www.docs.inductiveautomation.com/docs/8.3/other-editions/ignition-cloud-edition ; Ignition leased licensing https://www.docs.inductiveautomation.com/docs/8.3/platform/licensing-and-activation/leased-licensing ; Ignition server sizing and architecture guide https://inductiveautomation.com/resources/article/ignition-server-sizing-and-architecture-guide ; vendor product pages linked above, November 2026.

← All advisories

Cite this advisory: Red Tiger Security, "OT Vendors Are Moving to the Cloud: Know What Your Plant Depends On", November 16, 2026, https://www.redtigersecurity.com/advisory/ot-vendors-cloud-shift

Read the original source →

We are here to help.

Check out our resources and book a follow-up call with our team.

+1.877.387.7733