
GeoVision, the Taiwanese maker of video surveillance and access control systems, warned customers on 12 November 2026 that attackers are actively breaking into Windows servers running its GV-VMS video management software (advisory GV-SFW-2026-11-01). The attacks go through the WebCam Server feature, which lets people view cameras over the web, on servers that can be reached from the internet. Once inside, the attackers install XMRig, a cryptocurrency mining program that quietly burns the server's processor to make money for them. GeoVision is asking every GV-VMS customer to update or patch right away. Huntress, a managed security company, reported on 13 November that it saw these break-ins at 13 organizations across several industries, most of them between 8 and 10 November.
GeoVision says the weakness is only exposed when a GV-VMS server is connected to the internet with WebCam Server turned on. Huntress found that the affected servers it sampled were running an older build, GV-VMS 17.4.8.0, which carries three critical flaws GeoVision fixed back in April 2026 (CVE-2026-7372, CVE-2026-42369 and CVE-2026-42370). Each one lets someone with no password send a specially built web request and run their own code on the server. Neither GeoVision nor Huntress has said which of the three was used, but the same patches fix all three.
The mining program is the part people notice, because the server slows down under a heavy processor load. The more serious part is what came with it. According to Huntress, the attackers ran their code with full system rights, tried to switch off Microsoft Defender so the antivirus would not start, and left behind a small loader program, set to run every 15 minutes on some servers, that can find new attacker servers on its own. In other words, the miner is only what they chose to run this time. The same access could be used for something else, and Huntress says the loader can fetch other payloads, though it has not seen that happen in these cases.
Red Tiger's view is that camera systems are one of the most overlooked doors into an industrial site. At water and wastewater plants, substations, tank farms, terminals and factories, the video management server is usually a Windows machine that someone set up years ago, with remote viewing turned on so a supervisor or security contractor can check the gates from a phone. It often sits on the same network as the control system, or on a flat facility network that reaches it, and it is rarely patched on the same schedule as the business computers. A server like that, open to the internet with an old build, is exactly what these attackers went looking for. If it shares a network with the human-machine interface (HMI), the operator screens used to run the process, or the historian, a "nuisance" cryptominer becomes a foothold next to the control system.
Red Tiger can help with this beyond the assessment itself. We find the forgotten systems like camera servers during our site walk-downs, fix and harden the weaknesses we find, and can install a firewall and sensor at the site, connect them to the Red Tiger 24x7 security operations center (SOC), and monitor the plant for ongoing detection and response, with regular metrics and reports.
We are here to help, so check out our resources online at www.redtigersecurity.com and book a follow-up call with our team if you have any questions: https://calendly.com/jonathanpollet/30min
Sources: GeoVision Security Advisory GV-SFW-2026-11-01, XMRig Attack Vulnerability Response, 12 November 2026: https://dlcdn.geovision.com.tw/TechNotice/CyberSecurity/2026/XMRig_Response.pdf ; GeoVision Security Advisory GV-VMS-2026-04-01, 27 April 2026: https://dlcdn.geovision.com.tw/TechNotice/CyberSecurity/2026/Security_Advisory_GV-VMSV20-2026-04-01.pdf ; Huntress threat advisory, 13 November 2026: https://www.huntress.com/blog/geovision-camera-software-xmrig-cryptominer
Check out our resources and book a follow-up call with our team.