November 18, 2026
← All advisories

CISA Updates the Dams Sector Cybersecurity Maturity Model for 2026

Red Tiger Security infographic: CISA Updates the Dams Sector Cybersecurity Maturity Model. Dams-C2M2 and Implementation Guide, November 2026, a voluntary self-evaluation for dam, levee, hydro and reservoir owners built on Department of Energy C2M2 version 2.1. A card grid shows the ten domains, each rated from MIL0 (not started) to MIL3 (managed by policy): assets and configuration, threats and vulnerabilities, risk management, identity and access, situational awareness, incident response, third-party risk, workforce, architecture, and program management. Below, five steps from the Implementation Guide run left to right: prepare, evaluate, analyze gaps, prioritize and plan, and implement then re-evaluate. Note: guidance, not a regulation, and no deadline; every objective maps to the NIST Cybersecurity Framework 2.0.

The Cybersecurity and Infrastructure Security Agency (CISA) has published a 2026 update of the Dams Sector Cybersecurity Capability Maturity Model, known as the Dams-C2M2, together with a new edition of its companion Implementation Guide. Both documents are dated November 2026 and were posted on CISA's Dams Sector publications page on 16 November 2026. The model is a voluntary self-evaluation tool that helps dam, levee, hydropower and reservoir owners measure how mature their cybersecurity program is across both information technology (IT) and operational technology (OT), meaning the control systems that run gates, valves, pumps and generators. CISA states plainly that the model is guidance, not a regulation, and that it is not designed to give an organization a grade.

What changed

  1. The 2026 model is based on version 2.1 of the Department of Energy's Cybersecurity Capability Maturity Model (C2M2). The Dams-C2M2 was first published in 2017 and last updated in 2022.
  2. The model is organized into ten domains, which are groups of related security practices. They are Asset Identification, Change, and Configuration Management; Threat and Vulnerability Management; Risk Management; Identity and Access Management; Situational Awareness; Event and Incident Response, Continuity of Operations, and Service Restoration; Third-Party Risk Management; Workforce Management; Cybersecurity Architecture; and Cybersecurity Program Management.
  3. Each domain is scored on four maturity indicator levels, MIL0 through MIL3. MIL0 means the starting practices are not being done, MIL1 means they are done even if informally, MIL2 means they are documented and resourced, and MIL3 means they are governed by policy and actively managed. An organization can sit at different levels in different domains, and CISA notes that aiming for the top level everywhere may not be the best use of money.
  4. The model's reference mapping now ties each objective to the National Institute of Standards and Technology (NIST) Cybersecurity Framework (CSF) 2.0, NIST Special Publication 800-82 on operational technology security, and CISA's own Dams Sector handbooks. CISA also published a related Dams Sector Cybersecurity Framework Implementation Guidance document the same day.
  5. The Implementation Guide lays out five steps: prepare to use the model, perform an evaluation, analyze the gaps, prioritize and plan, and implement the plans and re-evaluate on a regular basis. It includes templates such as a maturity level selection worksheet and a gap mitigation plan.

Who it affects

Any organization that owns or operates dams, levees, hydropower facilities, navigation locks, storm surge barriers, tailings dams or water-supply reservoirs. In practice that includes water utilities, municipal utility districts, river authorities, irrigation districts, flood-control districts and hydroelectric generators. Many of these organizations are small, and CISA wrote the model so that every organization, regardless of size, should be able to reach MIL1 in all ten domains.

Dates and status

There is no compliance deadline. The model and the Implementation Guide are voluntary and do not change any existing regulatory obligations. The editable Word templates are available through the Homeland Security Information Network Critical Infrastructure (HSIN-CI) Dams Portal, and CISA offers free implementation training by webinar. Both can be requested from the Dams Sector Management Team at DamsSector@cisa.dhs.gov. CISA's design goal is that a single function can be evaluated in two days or less by an organization new to the model, and in less than a day by experienced users.

What to do now

  1. Pick one function and keep the scope tight. CISA's own example evaluates the control center operations at a single dam. For many owners, floodgate and spillway control, or the SCADA (supervisory control and data acquisition) system that runs a reservoir or hydro plant, is the right place to start.
  2. Run the self-evaluation as a workshop with operations, engineering, IT and management in the same room. The operators and control engineers know how the gates, remote terminal units and programmable logic controllers (PLCs) are really reached, and that is where the honest answers come from.
  3. Tie every gap to the physical consequence. A gap in identity and access management on the gate control system means something very different than the same gap on the business network, so rank the gaps by what could happen at the dam and downstream, not by how many practices are missing.
  4. Use the CSF 2.0 mapping in Appendix C of the model to line up your results with work you already do. If you are also a community water system, connect the findings to your America's Water Infrastructure Act (AWIA) risk and resilience assessment and any state dam safety or emergency action plan requirements, so one effort feeds all of them.

Red Tiger can help with this beyond the assessment itself. During our onsite facility assessments, our team walks the system from the perimeter through the control room down to the field devices at the dam, reservoir or hydro plant, and the results map directly to the Dams-C2M2 domains and the NIST CSF 2.0. We can facilitate the self-evaluation workshop, then help remediate and harden what it finds. We can also install a firewall and sensor at the site, connect them to the Red Tiger 24x7 security operations center (SOC), and monitor the site for ongoing detection and response, with regular metrics and reports. Our team has completed more than 500 assessments and trained more than 4,500 people.

We are here to help, so check out our resources online at www.redtigersecurity.com and book a follow-up call with our team if you have any questions: https://calendly.com/jonathanpollet/30min

Source: CISA, Dams Sector Cybersecurity Capability Maturity Model (C2M2), November 2026: https://www.cisa.gov/resources-tools/resources/dams-sector-cybersecurity-capability-maturity-model-c2m2

← All advisories

Cite this advisory: Red Tiger Security, "CISA Updates the Dams Sector Cybersecurity Maturity Model for 2026", November 18, 2026, https://www.redtigersecurity.com/advisory/cisa-dams-sector-c2m2-2026-update

Read the original source →

We are here to help.

Check out our resources and book a follow-up call with our team.

+1.877.387.7733